Search results
Results From The WOW.Com Content Network
The USP Controlled Room Temperature is a series of United States Pharmacopeia guidelines for the storage of pharmaceuticals; [1] the relevant omnibus standard is USP 797. [2] [3] Although 100% compliance remains challenging for any given facility, [4] the larger protocol may be regarded as constituting a form of clean room [5] which is included ...
Retrieved 4 April 2018. 1.2.3.3 Definition of Room Temperature: According to the United States Pharmacopeia National Forumlary [ sic] (USP-NF), the definition of room temperature is between 15 and 30 °C in the United States. However, in the EU, the room temperature is defined as being 15 to 25 °C, while in Japan, it is defined being 1 to 30 °C.
The ambient outdoor air in a typical urban area contains 35,000,000 particles for each cubic meter in the size range 0.5 μm and bigger, equivalent to an ISO 9 certified cleanroom. By comparison, an ISO 14644 -1 level 1 certified cleanroom permits no particles in that size range, and just 12 particles for each cubic meter of 0.3 μm and smaller.
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
Differential scanning calorimetry ( DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. [1] Both the sample and reference are maintained at nearly the same temperature throughout the experiment.
For example, a conventional heat pump system used to heat a building in Montana's −57 °C (−70 °F) low temperature or cool a building in the highest temperature ever recorded in the US—57 °C (134 °F) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air ...
Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 10 5 Pa (100 kPa, 1 bar ). NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [3] This standard is also called normal temperature and pressure (abbreviated as NTP ).