Search results
Results From The WOW.Com Content Network
Rocket candy. Rocket candy, or R-Candy, is a type of rocket propellant for model rockets made with a form of sugar as a fuel, and containing an oxidizer. The propellant can be divided into three groups of components: the fuel, the oxidizer, and the (optional) additive (s). In the past, sucrose was most commonly used as fuel.
An internal combustion engine ( ICE or IC engine) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high- temperature and high- pressure gases produced by combustion ...
The M4+2 engine has a four-stroke piston and a two-stroke piston. The shaft of the four-stroke piston rotates twice as fast as the shaft of the two-stroke piston, and the two-stroke part always runs at half speed. This ensures that both parts work optimally regarding fuel consumption at all times. The same principles apply to having two ...
A two-stroke diesel engine is a diesel engine that uses compression ignition in a two-stroke combustion cycle. It was invented by Hugo Güldner in 1899. [ 1] In compression ignition, air is first compressed and heated; fuel is then injected into the cylinder, causing it to self-ignite. This delivers a power stroke each time the piston rises and ...
A gasoline engine burns a mix of gasoline and air, consisting of a range of about twelve to eighteen parts (by weight) of air to one part of fuel (by weight). A mixture with a 14.7:1 air/fuel ratio is stoichiometric, that is when burned, 100% of the fuel and the oxygen are consumed.
For the mathematical concept, see Cyclic permutation. A two-stroke (or two-stroke cycle) engine is a type of internal combustion engine that completes a power cycle with two strokes of the piston (one up and one down movement) in one revolution of the crankshaft. A four-stroke engine requires four strokes of the piston to complete a power cycle ...
The Bourke engine was an attempt by Russell Bourke, in the 1920s, to improve the two-stroke internal combustion engine. Despite finishing his design and building several working engines, the onset of World War II, lack of test results, [1] and the poor health of his wife compounded to prevent his engine from ever coming successfully to market.
Scavenging is the process of replacing the exhaust gas in a cylinder of an internal combustion engine with the fresh air/fuel mixture (or fresh air, in the case of direct-injection engines) for the next cycle. If scavenging is incomplete, the remaining exhaust gases can cause improper combustion for the next cycle, leading to reduced power ...