Search results
Results From The WOW.Com Content Network
An exhaust gas temperature gauge ( EGT gauge or EGT sensor) is a meter used to monitor the exhaust gas temperature of an internal combustion engine in conjunction with a thermocouple -type pyrometer. EGT gauges are found in certain cars and aeroplanes. By monitoring EGT, the driver or pilot can get an idea of the vehicle's air-fuel ratio (AFR).
Digifant is an Engine Management System operated by an Engine Control Unit that actuates outputs, such as fuel injection and ignition systems, using information derived from sensor inputs, such as engine speed, exhaust oxygen and intake air flow. [ 1] Digifant was designed by Volkswagen Group, in cooperation with Robert Bosch GmbH .
Engine knocking. In spark-ignition internal combustion engines, knocking (also knock, detonation, spark knock, pinging or pinking) occurs when combustion of some of the air/fuel mixture in the cylinder does not result from propagation of the flame front ignited by the spark plug, but when one or more pockets of air/fuel mixture explode outside ...
Exhaust Gas Temperature Sensor 99: 153: 9 Exhaust Gas Temperature Sensor 9A: 154: 6 Hybrid/EV Vehicle System Data, Battery, Voltage 9B: 155: 4 Diesel Exhaust Fluid Sensor Data % 9C: 156: 17 O2 Sensor Data 9D: 157: 4 Engine Fuel Rate g/s 9E: 158: 2 Engine Exhaust Flow Rate kg/h 9F: 159: 9 Fuel System Percentage Use A0: 160: 4
The gauge and cold junction are usually calibrated at room temperature, 72 °F (22 °C). Because the thermocouple is calibrated for room temperature, the gauge readings will only be 100% accurate at that engine compartment temperature. If the engine compartment temperature is colder, the CHT temperature will display higher.
The firing order of an internal combustion engine is the sequence of ignition for the cylinders. In a spark ignition (e.g. gasoline/petrol) engine, the firing order corresponds to the order in which the spark plugs are operated. In a diesel engine, the firing order corresponds to the order in which fuel is injected into each cylinder.
A heater core is a radiator -like device used in heating the cabin of a vehicle. Hot coolant from the vehicle's engine is passed through a winding tube of the core, a heat exchanger between coolant and cabin air. Fins attached to the core tubes serve to increase surface area for heat transfer to air that is forced past them by a fan, thereby ...
MAP sensor. The manifold absolute pressure sensor ( MAP sensor) is one of the sensors used in an internal combustion engine 's electronic control system. Engines that use a MAP sensor are typically fuel injected. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU).