Search results
Results From The WOW.Com Content Network
This is generally known as Thermal Throttling in the case of reduction of clock speeds, or Thermal Shutdown in the case of a complete shutdown of the device or system. Cooling may be designed to reduce the ambient temperature within the case of a computer, such as by exhausting hot air, or to cool a single component or small area (spot cooling).
The thermal design power ( TDP ), sometimes called thermal design point, is the maximum amount of heat generated by a computer chip or component (often a CPU, GPU or system on a chip) that the cooling system in a computer is designed to dissipate under any workload. Some sources state that the peak power rating for a microprocessor is usually 1 ...
Use a psychrometric chart to calculate wet bulb temperature, and then add 5–7 °F as described above. Use a rule of thumb which estimates that the wet bulb temperature is approximately equal to the ambient temperature, minus one third of the difference between the ambient temperature and the dew point. As before, add 5–7 °F as described above.
Total air temperature is an essential input to an air data computer in order to enable the computation of static air temperature and hence true airspeed . The relationship between static and total air temperatures is given by: where: static air temperature, SAT ( kelvins or degrees Rankine) total air temperature, TAT (kelvins or degrees Rankine ...
Thermally processed material is usually totally amorphous, [7] and as a result is highly transparent to visible light, with better light transmission than many kinds of glass. Polycarbonate has a glass transition temperature of about 147 °C (297 °F), [8] so it softens gradually above this point and flows above about 155 °C (311 °F). [9]
Newton's law of cooling. In the study of heat transfer, Newton's law of cooling is a physical law which states that the rate of heat loss of a body is directly proportional to the difference in the temperatures between the body and its environment. The law is frequently qualified to include the condition that the temperature difference is small ...
The ambient outdoor air in a typical urban area contains 35,000,000 particles for each cubic meter in the size range 0.5 μm and bigger, equivalent to an ISO 9 certified cleanroom. By comparison, an ISO 14644 -1 level 1 certified cleanroom permits no particles in that size range, and just 12 particles for each cubic meter of 0.3 μm and smaller.
Noise temperature. In electronics, noise temperature is one way of expressing the level of available noise power introduced by a component or source. The power spectral density of the noise is expressed in terms of the temperature (in kelvins) that would produce that level of Johnson–Nyquist noise, thus: where: