Search results
Results From The WOW.Com Content Network
Identification friend or foe. Identification, friend or foe ( IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio ...
A traffic alert and collision avoidance system ( TCAS, pronounced / tiːkæs /; TEE-kas) is an aircraft collision avoidance system designed to reduce the incidence of mid-air collision (MAC) between aircraft. It monitors the airspace around an aircraft for other aircraft equipped with a corresponding active transponder, independent of air ...
The aviation transponder interrogation modes are the standard formats of pulsed sequences from an interrogating Secondary Surveillance Radar (SSR) or similar Automatic Dependent Surveillance-Broadcast (ADS-B) system. The reply format is usually referred to as a "code" from a transponder, which is used to determine detailed information from a ...
The transponder has a small required set of controls and is simple to operate. It has a method to enter the four-digit transponder code, also known as a beacon code or squawk code, and a control to transmit an ident, which is done at the controller's request (see SPI pulse below). Transponders typically have 4 operating modes: Off, Standby, On ...
Radio-frequency identification ( RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder called a tag, a radio receiver, and a transmitter. When triggered by an electromagnetic interrogation pulse from a nearby RFID reader device, the tag transmits ...
Variations in traffic light operation. Swedish traffic light (left) for use by public transport vehicles only. All signals use white lighting and special symbols ("S", "–" and an arrow) to distinguish them from regular signals. The small light at the top tells the driver when the vehicle's transponder signal is received by the traffic light.
In aviation, distance measuring equipment ( DME) is a radio navigation technology that measures the slant range (distance) between an aircraft and a ground station by timing the propagation delay of radio signals in the frequency band between 960 and 1215 megahertz (MHz). Line-of-visibility between the aircraft and ground station is required.
0041–0057. Belgium. Assigned for VFR traffic under Flight Information Services (BXL FIC). [citation needed] 0100. Australia. Flights operating at aerodromes (in lieu of codes 1200, 2000 or 3000 when assigned by ATC or noted in the Enroute Supplement). [6] 0100–0400.