Search results
Results From The WOW.Com Content Network
Combustibility and flammability. A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
Flammability diagram. Flammability diagrams show the control of flammability in mixtures of fuel, oxygen and an inert gas, typically nitrogen. Mixtures of the three gasses are usually depicted in a triangular diagram, known as a ternary plot. Such diagrams are available in the speciality literature. [ 1][ 2][ 3] The same information can be ...
A flammable liquid is a liquid which can be easily ignited in air at ambient temperatures, i.e. it has a flash point at or below nominal threshold temperatures defined by a number of national and international standards organisations. The Occupational Safety and Health Administration (OSHA) of the United States Department of Labor defines a ...
Flammable gases – Gases which at 20 °C and a standard pressure of 101.3 kPa: are ignitable when in a mixture of 13 percent or less by volume with air; or; have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit. Alternative sign. Division 2.1 Non-flammable non-toxic gases – Gases which:
The constant-pressure adiabatic flame temperature of such substances in air is in a relatively narrow range around 1,950 °C (2,220 K; 3,540 °F). [citation needed] This is mostly because the heat of combustion of these compounds is roughly proportional to the amount of oxygen consumed, which proportionally increases the amount of air that has ...
The flash point is a descriptive characteristic that is used to distinguish between flammable fuels, such as petrol (also known as gasoline ), and combustible fuels, such as diesel . It is also used to characterize the fire hazards of fuels. Fuels which have a flash point less than 37.8 °C (100.0 °F) are called flammable, whereas fuels having ...
Flame test. A flame test is relatively quick test for the presence of some elements in a sample. The technique is archaic and of questionable reliability, but once was a component of qualitative inorganic analysis. The phenomenon is related to pyrotechnics and atomic emission spectroscopy. [ 1] The color of the flames is understood through the ...
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...