Search results
Results From The WOW.Com Content Network
Automatic transmission fluid (ATF) is a hydraulic fluid that is essential for the proper functioning of vehicles equipped with automatic transmissions. Usually, it is coloured red or green to differentiate it from motor oil and other fluids in the vehicle. This fluid is designed to meet the unique demands of an automatic transmission.
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
The engine temperature on modern cars is primarily controlled by a wax-pellet type of thermostat, a valve that opens once the engine has reached its optimum operating temperature. When the engine is cold, the thermostat is closed except for a small bypass flow so that the thermostat experiences changes to the coolant temperature as the engine ...
This fluid was better suited for the higher fluid temperatures caused by the unique torque converters [7] [8] [9] and higher power engines of the day. The fluid specification was revised again in 1958, 1959, and 1960. [10] GM continued the licensing program, allowing oil companies to produce the new Type "A" suffix "A" fluid under their own ...
Gear oil is a lubricant made specifically for transmissions, transfer cases, and differentials in automobiles, trucks, and other machinery. It has high viscosity and usually contains organosulfur compounds. Some modern automatic transaxles (integrated transmission and differential) do not use a heavy oil at all but lubricate with the lower ...
The Ford Model T used a 177 cu in (2.9 L) sidevalve, reverse-flow cylinder head inline 4-cylinder engine. It was primarily a gasoline engine. It produced 20 hp (14.9 kW) for a top speed of 45 mph (72 km/h). It was built in-unit with the Model T's novel transmission (a planetary design ), sharing the same lubricating oil .
67–82 PS (49–60 kW; 66–81 bhp) ASE ( DIN) The Perkins 4.236 is a diesel engine manufactured by Perkins Engines. First produced in 1964,over 70,000 were produced in the first three years, and production increased to 60,000 units per annum. The engine was both innovative (using direct injection) and reliable, becoming a worldwide sales ...
Viscosity depends strongly on temperature. In liquids it usually decreases with increasing temperature, whereas, in most gases, viscosity increases with increasing temperature. This article discusses several models of this dependence, ranging from rigorous first-principles calculations for monatomic gases, to empirical correlations for liquids.