Search results
Results From The WOW.Com Content Network
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
An elevated temperature material that meets the definition of a Class 3 material because it is intentionally heated and offered for transportation or transported at ...
ATEX Directive 2014/34/EU was published on 29 March 2014, by the European Parliament. It refers to the harmonization of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres. Regarding ATEX 99/92/EC Directive, the requirement is that Employers must classify areas where ...
Comparison of temperature scales. * Normal human body temperature is 36.8 °C ±0.7 °C, or 98.2 °F ±1.3 °F. The commonly given value 98.6 °F is simply the exact conversion of the nineteenth-century German standard of 37 °C. Since it does not list an acceptable range, it could therefore be said to have excess (invalid) precision.
The paste manufacturer will suggest a suitable reflow temperature profile to suit their individual paste. The main requirement is a gentle rise in temperature to prevent explosive expansion (which can cause "solder balling"), yet activate the flux. Thereafter, the solder melts. The time in this area is known as Time Above Liquidus. A reasonably ...
6061 sheet in the T4 condition can be formed with limited ductility in the cold state. For deep draw and complex shapes, and for the avoidance of spring-back, an aluminium hot stamping process ( Hot Form Quench ) can be used, which forms a blank at a elevated temperature (~ 550 C) in a cooled die, leaving a part in W-temper condition before ...
Any material that meets the definition in 49 CFR 171.8 for an elevated temperature material, a hazardous substance, a hazardous waste, or a marine pollutant. A new sub-class, class 9A, has been in effect since January 1, 2017. This is limited to the labeling of the transport of lithium batteries.
Bathythermograph. The bathythermograph, or BT, also known as the Mechanical Bathythermograph, or MBT; [1] is a device that holds a temperature sensor and a transducer to detect changes in water temperature versus depth down to a depth of approximately 285 meters (935 feet). Lowered by a small winch on the ship into the water, the BT records ...