Search results
Results From The WOW.Com Content Network
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
Flash point. Flaming cocktails with a flash point lower than room temperature. The flash point of a material is the "lowest liquid temperature at which, under certain standardized conditions, a liquid gives off vapours in a quantity such as to be capable of forming an ignitable vapour/air mixture". (EN 60079-10-1)
Radiator (engine cooling) Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plants or any similar use of such an engine. Internal combustion engines are often cooled by circulating a liquid called engine ...
Car engine thermostat. Perhaps the most common example of purely mechanical thermostat technology in use today is the internal combustion engine cooling system thermostat, used to maintain the engine near its optimum operating temperature by regulating the flow of coolant to an air-cooled radiator. This type of thermostat operates using a ...
this was the first part of North America to have its code changed three times: from 213 to 714 1951: to 619 in 1982, and to 760 in 1997. was to have originally split off the portion of 760 serving San Diego County to a new 442 area code in late 2008/early 2009; that plan was cancelled. 2009: overlaid by 442. 761.
Telephone prefix. A telephone prefix is the first set of digits after the country, and area codes of a telephone number. In the North American Numbering Plan countries (country code 1), it is the first three digits of a seven-digit local phone number, the second three digits of the 3-3-4 scheme. In other countries, both the prefix and the ...
6061 sheet in the T4 condition can be formed with limited ductility in the cold state. For deep draw and complex shapes, and for the avoidance of spring-back, an aluminium hot stamping process ( Hot Form Quench ) can be used, which forms a blank at a elevated temperature (~ 550 C) in a cooled die, leaving a part in W-temper condition before ...
ISO 3166-1 ( Codes for the representation of names of countries and their subdivisions – Part 1: Country codes) is a standard defining codes for the names of countries, dependent territories, and special areas of geographical interest. It is the first part of the ISO 3166 standard published by the International Organization for Standardization .