Search results
Results From The WOW.Com Content Network
Flammability diagrams show the control of flammability in mixtures of fuel, oxygen and an inert gas, typically nitrogen. Mixtures of the three gasses are usually depicted in a triangular diagram, known as a ternary plot. Such diagrams are available in the speciality literature. [ 1][ 2][ 3] The same information can be depicted in a normal ...
A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
Diagram showing the five requirements for a dust explosion. There are five necessary conditions for a dust explosion: [3] A combustible dust; The dust is dispersed in the air within certain flammability limits; There is an oxidant (typically atmospheric oxygen) There is an ignition source; The area is confined – a building can be an enclosure
Lower flammability limit (LFL): The lowest concentration (percentage) of a gas or a vapor in air capable of producing a flash of fire in the presence of an ignition source (arc, flame, heat). The term is considered by many safety professionals to be the same as the lower explosive level (LEL). At a concentration in air lower than the LFL, gas ...
A flame (from Latin flamma) is the visible, gaseous part of a fire. It is caused by a highly exothermic chemical reaction made in a thin zone. [ 1] When flames are hot enough to have ionized gaseous components of sufficient density, they are then considered plasma. [vague][ 2]
A ternary flammability diagram, showing which mixtures of methane, oxygen gas, and inert nitrogen gas will burn. A ternary plot, ternary graph, triangle plot, simplex plot, or Gibbs triangle is a barycentric plot on three variables which sum to a constant. [1] It graphically depicts the ratios of the three variables as positions in an ...
Flashover. A flashover is the near-simultaneous ignition of most of the directly exposed combustible material in an enclosed area. When certain organic materials are heated, they undergo thermal decomposition and release flammable gases. Flashover occurs when the majority of the exposed surfaces in a space are heated to their autoignition ...
Lower flammability limit. The lower flammability limit ( LFL ), [ 1] usually expressed in volume per cent, is the lower end of the concentration range over which a flammable mixture of gas or vapour in air can be ignited at a given temperature and pressure. The flammability range is delineated by the upper and lower flammability limits.