Search results
Results From The WOW.Com Content Network
This is generally known as Thermal Throttling in the case of reduction of clock speeds, or Thermal Shutdown in the case of a complete shutdown of the device or system. Cooling may be designed to reduce the ambient temperature within the case of a computer, such as by exhausting hot air, or to cool a single component or small area (spot cooling).
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
Junction temperature, short for transistor junction temperature, [ 1] is the highest operating temperature of the actual semiconductor in an electronic device. In operation, it is higher than case temperature and the temperature of the part's exterior. The difference is equal to the amount of heat transferred from the junction to case ...
The additional heat increases the ambient air temperature within the system case, which may affect other components. The hot air blown out of the case heats the room it's in. Fan noise : High-performance fans running at maximum speed used for the required degree of cooling of an overclocked machine can be noisy, some producing 50 dB or more of ...
Temperature measurement. A medical/clinical thermometer showing the temperature of 38.7 °C (101.7 °F) Temperature measurement (also known as thermometry) describes the process of measuring a current temperature for immediate or later evaluation. Datasets consisting of repeated standardized measurements can be used to assess temperature trends.
For example, a conventional heat pump system used to heat a building in Montana's −57 °C (−70 °F) low temperature or cool a building in the highest temperature ever recorded in the US—57 °C (134 °F) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air ...
The wet-bulb temperature is the lowest temperature that may be achieved by evaporative cooling of a water-wetted, ventilated surface.. By contrast, the dew point is the temperature to which the ambient air must be cooled to reach 100% relative humidity assuming there is no further evaporation into the air; it is the temperature where condensation (dew) and clouds would form.
Retrieved 4 April 2018. 1.2.3.3 Definition of Room Temperature: According to the United States Pharmacopeia National Forumlary [ sic] (USP-NF), the definition of room temperature is between 15 and 30 °C in the United States. However, in the EU, the room temperature is defined as being 15 to 25 °C, while in Japan, it is defined being 1 to 30 °C.