Search results
Results From The WOW.Com Content Network
Flammability diagrams show the control of flammability in mixtures of fuel, oxygen and an inert gas, typically nitrogen. Mixtures of the three gasses are usually depicted in a triangular diagram, known as a ternary plot. Such diagrams are available in the speciality literature. [ 1][ 2][ 3] The same information can be depicted in a normal ...
Lower flammability limit (LFL): The lowest concentration (percentage) of a gas or a vapor in air capable of producing a flash of fire in the presence of an ignition source (arc, flame, heat). The term is considered by many safety professionals to be the same as the lower explosive level (LEL). At a concentration in air lower than the LFL, gas ...
Combustibility and flammability. A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
Flammable gases – Gases which at 20 °C and a standard pressure of 101.3 kPa: are ignitable when in a mixture of 13 percent or less by volume with air; or; have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit. Alternative sign. Division 2.1 Non-flammable non-toxic gases – Gases which:
A flammable liquid is a liquid which can be easily ignited in air at ambient temperatures, i.e. it has a flash point at or below nominal threshold temperatures defined by a number of national and international standards organisations. The Occupational Safety and Health Administration (OSHA) of the United States Department of Labor defines a ...
UL 94. UL 94, the Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing, is a plastics flammability standard released by Underwriters Laboratories of the United States. [ 1] The standard determines the material's tendency to either extinguish or spread the flame once the specimen has been ignited.
An aerosol must be assigned to Division 2.1 if the contents include 85% by mass or more flammable components and the chemical heat of combustion is 30 kJ/g or more; An aerosol must be assigned to Division 2.1 if it is deemed flammable in accordance with the appropriate tests of the UN Manual of Tests and Criteria for flammability.
This page was last edited on 15 June 2007, at 09:51 (UTC).; Text is available under the Creative Commons Attribution-ShareAlike License 4.0; additional terms may ...