Gamer.Site Web Search

Search results

1. Results From The WOW.Com Content Network

2. USB hardware - Wikipedia

   en.wikipedia.org/wiki/USB_hardware

   The USB 3.0 Micro-B plug effectively consists of a standard USB 2.0 Micro-B cable plug, with an additional 5 pins plug "stacked" to the side of it. In this way, cables with smaller 5 pin USB 2.0 Micro-B plugs can be plugged into devices with 10 contact USB 3.0 Micro-B receptacles and achieve backward compatibility.

3. USB - Wikipedia

   en.wikipedia.org/wiki/USB

   The Mini-USB connectors (Mini-A, Mini-B, Mini-AB) were introduced for mobile devices, but they were quickly replaced by the thinner Micro-USB connectors (Micro-A, Micro-B, Micro-AB). The Type-C connector, also known as USB-C , is not exclusive to USB, is the only current standard for USB, is required for USB4, and is required by other standards ...

4. Y-cable - Wikipedia

   en.wikipedia.org/wiki/Y-cable

   Y-cable. A Shure FP24 preamp 's mono XLR line outputs connected to an Edirol R-09 recorder's 3.5mm stereo jack line input, using a Y-cable. This is an example of consolidating connectors, as described below. A Y-cable, Y cable, or splitter cable is a cable with three ends: one common end and two other ends. The Y-cable can resemble the Latin ...

5. USB 3.0 - Wikipedia

   en.wikipedia.org/wiki/USB_3.0

   USB 3.0 also introduced a new Micro-B cable plug, which consists of a standard USB 1.x/2.0 Micro-B cable plug, with an additional 5-pin plug "stacked" beside it. That way, the USB 3.0 Micro-B host receptacle preserves its backward compatibility with the USB 1.x/2.0 Micro-B cable plug, allowing devices with USB 3.0 Micro-B ports to run at USB 2. ...

6. USB On-The-Go - Wikipedia

   en.wikipedia.org/wiki/USB_On-The-Go

   The USB On-The-Go logo. Non-compliant USB On-The-Go adapter for a defective smartphone or tablet computer. Some products were made with defective ports that do not accept Micro-A plugs. Instead, they were designed to accept Micro-AB plugs, which are similar to Micro-A plugs but have a different shell. This means that Micro-A plugs cannot be ...

7. Mobile High-Definition Link - Wikipedia

   en.wikipedia.org/wiki/Mobile_High-Definition_Link

   This permits a much lighter cable and a much smaller connector on the mobile device, as a typical MHL source will be shared with USB 2.0 on a standard 5-pin Micro-USB receptacle. [1] (Although MHL ports can be dedicated to MHL alone, the standard is designed to permit port sharing with the most commonly used ports.)