Search results
Results From The WOW.Com Content Network
For example, a Type 304 stainless steel has a 0.2% proof strength in the region of 280 MPa (41 ksi), a 22%Cr duplex stainless steel a minimum 0.2% proof strength of some 450 MPa (65 ksi) and a superduplex grade a minimum of 550 MPa (80 ksi).
Thermal diffusivity. In heat transfer analysis, thermal diffusivity is the thermal conductivity divided by density and specific heat capacity at constant pressure. [1] It is a measure of the rate of heat transfer inside a material. It has units of m 2 /s. Thermal diffusivity is usually denoted by lowercase alpha ( α ), but a, h, κ ( kappa ...
Austenitic stainless steel is one of the five classes of stainless steel by crystalline structure (along with ferritic, martensitic, duplex and precipitation hardened). Its primary crystalline structure is austenite ( face-centered cubic ) and it prevents steels from being hardenable by heat treatment and makes them essentially non-magnetic. [2]
Isothermal transformation diagram. Time-Temperature-Transformation diagram for two steels: one with 0.4% wt. C (red line) and one with 0.4% wt. C and 2% weight Mn (green line). P = pearlite, B = bainite and M = martensite. Isothermal transformation diagrams (also known as time-temperature-transformation ( TTT) diagrams) are plots of temperature ...
Forging temperature. Forging temperature is the temperature at which a metal becomes substantially more soft, but is lower than the melting temperature, such that it can be reshaped by forging. [1] Bringing a metal to its forging temperature allows the metal's shape to be changed by applying a relatively small force, without creating cracks.
The temperature range for process annealing ranges from 260 °C (500 °F) to 760 °C (1400 °F), depending on the alloy in question. This process is mainly suited for low-carbon steel. The material is heated up to a temperature just below the lower critical temperature of steel.
Precipitation hardening, also called age hardening or particle hardening, is a heat treatment technique used to increase the yield strength of malleable materials, including most structural alloys of aluminium, magnesium, nickel, titanium, and some steels, stainless steels, and duplex stainless steel. In superalloys, it is known to cause yield ...
Stainless steel, also known as inox, corrosion-resistant steel ( CRES) and rustless steel, is an alloy of iron that is resistant to rusting and corrosion. It contains iron with chromium and other elements such as molybdenum, carbon, nickel and nitrogen depending on its specific use and cost. Stainless steel's resistance to corrosion results ...