Search results
Results From The WOW.Com Content Network
PIC (usually pronounced as /pɪk/) is a family of microcontrollers made by Microchip Technology, derived from the PIC1640 [ 1][ 2] originally developed by General Instrument 's Microelectronics Division. The name PIC initially referred to Peripheral Interface Controller, [ 3] and is currently expanded as Programmable Intelligent Computer. [ 4]
8. 19. 2. 2010. VM2 is a family of single board microcontrollers intended for use in Automation, Instrumentation, Hand Held Devices and Process Control. Programming environment: Venom2 Archived 2017-11-15 at the Wayback Machine language, VenomIDE Archived 2017-11-15 at the Wayback Machine development system, Visual Designer.
The integrated circuit sensor may come in a variety of interfaces — analogue or digital; for digital, these could be Serial Peripheral Interface, SMBus/I 2 C or 1-Wire.. In OpenBSD, many of the I 2 C temperature sensors from the below list have been supported and are accessible through the generalised hardware sensors framework [3] since OpenBSD 3.9 (2006), [4] [5]: §6.1 which has also ...
Exhaust Gas Temperature Sensor 99: 153: 9 Exhaust Gas Temperature Sensor 9A: 154: 6 Hybrid/EV Vehicle System Data, Battery, Voltage 9B: 155: 4 Diesel Exhaust Fluid Sensor Data % 9C: 156: 17 O2 Sensor Data 9D: 157: 4 Engine Fuel Rate g/s 9E: 158: 2 Engine Exhaust Flow Rate kg/h 9F: 159: 9 Fuel System Percentage Use A0: 160: 4
The silicon bandgap temperature sensor is an extremely common form of temperature sensor ( thermometer) used in electronic equipment. Its main advantage is that it can be included in a silicon integrated circuit at very low cost. The principle of the sensor is that the forward voltage of a silicon diode, which may be the base-emitter junction ...
Mass flow sensor. A mass (air) flow sensor ( MAF) is a sensor used to determine the mass flow rate of air entering a fuel-injected internal combustion engine . The air mass information is necessary for the engine control unit (ECU) to balance and deliver the correct fuel mass to the engine. Air changes its density with temperature and pressure.
Valve actuator. Electric actuator (blue cylinder) on a valve in a power plant. A black handwheel is visible on the actuator, which allows manual positioning of the valve. The blue valve body is visible in-line with the pipe. The valve actuator opens or closes the butterfly disc of the valve based on electrical signals sent to the actuator.
A thermowell consists of a tube closed at one end and mounted on the wall of the piping or vessel within which the fluid of interest flows. A temperature sensor, such as a thermometer, thermocouple, or resistance temperature detector, is inserted in the open end of the tube, which is usually in the open air outside the piping or vessel and any ...