Search results
Results From The WOW.Com Content Network
Thermal cutoff. An assortment of thermal fuses. A thermal cutoff is an electrical safety device (either a thermal fuse or thermal switch) that interrupts electric current when heated to a specific temperature. These devices may be for one-time use (a thermal fuse), or may be reset manually or automatically (a thermal switch).
A thermostat, when set to "cool", will only turn on when the ambient temperature of the surrounding room is above the set temperature. Thus, if the controlled space has a temperature normally above the desired setting when the heating/cooling system is off, it would be wise to keep the thermostat set to "cool", despite what the temperature is ...
Fuses are mechanically interchangeable; it is up to the end-user or appliance manufacturer to install the appropriate rating fuse. It has long been a common practice, although not a good one, for the maximum capacity 13A fuse to be supplied and used by default. More appropriate lower-capacity fuses are now supplied with some plugs instead.
A bimetallic coil from a thermostat reacts to the heat from a lighter, by uncoiling and then coiling back up when the lighter is removed. A bimetallic strip or bimetal strip is a strip that consists of two strips of different metals which expand at different rates as they are heated. They are used to convert a temperature change into mechanical ...
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
For example, a conventional heat pump system used to heat a building in Montana's −57 °C (−70 °F) low temperature or cool a building in the highest temperature ever recorded in the US—57 °C (134 °F) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air ...
The balance point temperature is mathematically defined as: Equation 1: tbalance = tthermostat - Q IHG + Q SOL U bldg. Where: tbalance is the balance point outdoor air temperature, given in °C (°F). tThermostat is the building thermostat set-point temperature, given in °C (°F). QIHG is the internal heat generation rate per unit floor ...
Thyroid hormones are any hormones produced and released by the thyroid gland, namely triiodothyronine ( T3) and thyroxine ( T4 ). They are tyrosine -based hormones that are primarily responsible for regulation of metabolism. T 3 and T 4 are partially composed of iodine, derived from food. [ 2] A deficiency of iodine leads to decreased ...