Search results
Results From The WOW.Com Content Network
A temperature gradient is a physical quantity that describes in which direction and at what rate the temperature changes the most rapidly around a particular location. The temperature spatial gradient is a vector quantity with dimension of temperature difference per unit length. The SI unit is kelvin per meter (K/m).
Applying the Stefan–Boltzmann law, = (), where A and T are the body surface area and temperature, is the emissivity, and T 0 is the ambient temperature. The total surface area of an adult is about 2 m 2 , and the mid- and far-infrared emissivity of skin and most clothing is near unity, as it is for most nonmetallic surfaces.
NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [3] This standard is also called normal temperature and pressure (abbreviated as NTP). However, a common temperature and pressure in use by NIST for thermodynamic experiments is 298.15 K (25°C, 77°F) and 1 bar (14.5038 psi, 100 kPa).
The first of the cooling load factors used in this method is the CLTD, or the Cooling Load Temperature Difference. This factor is used to represent the temperature difference between indoor and outdoor air with the inclusion of the heating effects of solar radiation. [1] [5] The second factor is the CLF, or the cooling load factor.
In fluid thermodynamics, the film temperature (T f ) is an approximation of the temperature of a fluid inside a convection boundary layer. It is calculated as the arithmetic mean of the temperature at the surface of the solid boundary wall ( T w ) and the free-stream temperature ( T ∞ ): [ 1 ]
The concept of the bulk temperature is that adiabatic mixing of the fluid from a given cross section of the duct will result in some equilibrium temperature that accurately reflects the average temperature of the moving fluid, more so than a simple average like the film temperature. [1]
In normal conditions, the dew point temperature will not be greater than the air temperature, since relative humidity typically [5] does not exceed 100%. [ 6 ] In technical terms, the dew point is the temperature at which the water vapor in a sample of air at constant barometric pressure condenses into liquid water at the same rate at which it ...
Ambient intelligence (AmI) is a term used in computing to refer to electronic environments that are sensitive to the presence of people. The term is generally applied to consumer electronics , telecommunications , and computing .