Search results
Results From The WOW.Com Content Network
Radiator (engine cooling) Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plants or any similar use of such an engine. Internal combustion engines are often cooled by circulating a liquid called engine ...
Reduces the need for a Remote starter, thereby further saving fuel and emissions. Block heaters or coolant heaters are also found on the diesel engines in standby generators, to reduce the time taken for the generator to reach full power output in an emergency. Considerations. The vehicle operator must have access to electrical power.
PID code (e.g.: 05 = Engine coolant temperature) value of the specified parameter, byte 0 value, byte 1 (optional) value, byte 2 (optional) value, byte 3 (optional) not used (may be 00h or 55h) Vehicle specific 7E8h, or 8h + physical ID of module. Number of additional data bytes: 4to 7
Diesel exhaust fluid ( DEF; also known as AUS 32 and marketed as AdBlue [3]) is a liquid used to reduce the amount of air pollution created by a diesel engine. Specifically, DEF is an aqueous urea solution made with 32.5% urea and 67.5% deionized water. DEF is consumed in a selective catalytic reduction (SCR) that lowers the concentration of ...
A coolant is a substance, typically liquid, that is used to reduce or regulate the temperature of a system. An ideal coolant has high thermal capacity, low viscosity, is low-cost, non-toxic, chemically inert and neither causes nor promotes corrosion of the cooling system. Some applications also require the coolant to be an electrical insulator .
Basic principles. Most internal combustion engines are fluid cooled using either air (a gaseous fluid) or a liquid coolant run through a heat exchanger ( radiator) cooled by air. Marine engines and some stationary engines have ready access to a large volume of water at a suitable temperature. The water may be used directly to cool the engine ...
A steam generator (aka nuclear steam raising plant ('NSRP')) is a heat exchanger used to convert water into steam from heat produced in a nuclear reactor core. They are used in pressurized water reactor between the primary and secondary coolant loops. In typical PWR designs, the primary coolant is high-purity water, kept under high pressure so ...
Lead-bismuth eutectic. 123.5 °C. 1670 °C. A nuclear reactor coolant is a coolant in a nuclear reactor used to remove heat from the nuclear reactor core and transfer it to electrical generators and the environment . Frequently, a chain of two coolant loops are used because the primary coolant loop takes on short-term radioactivity from the ...