Search results
Results From The WOW.Com Content Network
Computer cooling. A finned air cooled heatsink with fan clipped onto a CPU, with a smaller passive heatsink without fan in the background. A 3-fan heatsink mounted on a video card to maximize cooling efficiency of the GPU and surrounding components. Commodore 128DCR computer's switch-mode power supply, with a user-installed 60 mm cooling fan.
Junction temperature. Junction temperature, short for transistor junction temperature, [ 1] is the highest operating temperature of the actual semiconductor in an electronic device. In operation, it is higher than case temperature and the temperature of the part's exterior. The difference is equal to the amount of heat transferred from the ...
Total air temperature is an essential input to an air data computer in order to enable the computation of static air temperature and hence true airspeed . The relationship between static and total air temperatures is given by: where: static air temperature, SAT ( kelvins or degrees Rankine) total air temperature, TAT (kelvins or degrees Rankine ...
Thermal management (electronics) 60×60×10 mm straight-finned heat sink with a thermal profile and swirling animated forced convection flow trajectories from a tubeaxial fan, predicted using a CFD analysis package. Free convection thermoelectric cooler (Peltier cooler) with heat sink surface temperature contours, and rising warmer air and ...
An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating ...
Newton's law of cooling. In the study of heat transfer, Newton's law of cooling is a physical law which states that the rate of heat loss of a body is directly proportional to the difference in the temperatures between the body and its environment. The law is frequently qualified to include the condition that the temperature difference is small ...
Polycarbonate has a glass transition temperature of about 147 °C (297 °F), [8] so it softens gradually above this point and flows above about 155 °C (311 °F). [9] Tools must be held at high temperatures, generally above 80 °C (176 °F) to make strain-free and stress-free products.
Flex temp. Flex temp is a technique used to produce cost savings through increased engine life and reduced overhaul and fuel costs [ 1] for airliners by allowing them to take-off at less than rated thrust. [ 2] For Airbus and Fokker aircraft the technique is known as flex temp or just flex. Other manufacturers use the terms Assumed temperature ...