Search results
Results From The WOW.Com Content Network
Combustibility and flammability. A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
An example of a HMIS III label for Diesel Fuel. The Hazardous Materials Identification System ( HMIS) is a propritary numerical hazard rating that incorporates the use of labels with color bars developed by the American Coatings Association as a compliance aid for the OSHA Hazard Communication (HazCom) Standard. [ 1][ 2] The name and ...
Flammable gases – Gases which at 20 °C and a standard pressure of 101.3 kPa: are ignitable when in a mixture of 13 percent or less by volume with air; or; have a flammable range with air of at least 12 percentage points regardless of the lower flammable limit. Alternative sign. Division 2.1 Non-flammable non-toxic gases – Gases which:
A flammable liquid is a liquid which can be easily ignited in air at ambient temperatures, i.e. it has a flash point at or below nominal threshold temperatures defined by a number of national and international standards organisations. The Occupational Safety and Health Administration (OSHA) of the United States Department of Labor defines a ...
Lower flammability limit (LFL): The lowest concentration (percentage) of a gas or a vapor in air capable of producing a flash of fire in the presence of an ignition source (arc, flame, heat). The term is considered by many safety professionals to be the same as the lower explosive level (LEL). At a concentration in air lower than the LFL, gas ...
Flammability diagrams show the control of flammability in mixtures of fuel, oxygen and an inert gas, typically nitrogen. Mixtures of the three gasses are usually depicted in a triangular diagram, known as a ternary plot. Such diagrams are available in the speciality literature. [ 1][ 2][ 3] The same information can be depicted in a normal ...
Hazard statements are one of the key elements for the labelling of containers under the GHS, along with: [ 3] the identity of the supplier (who might be a manufacturer or importer). Each hazard statement is designated a code, starting with the letter H and followed by three digits. Statements which correspond to related hazards are grouped ...
The constant volume adiabatic flame temperature is the temperature that results from a complete combustion process that occurs without any work, heat transfer or changes in kinetic or potential energy. Its temperature is higher than in the constant pressure process because no energy is utilized to change the volume of the system (i.e., generate ...