Search results
Results From The WOW.Com Content Network
The 6.2 L; 376.0 cu in (6,162 cc) EcoTec3 is a Generation V small-block V8 truck engine (VIN code "J"). The L86 is an LT1 engine modified for truck use with a compression ratio of 11.5 to 1. In 2019, GM introduced the L87 as the successor to the L86. Power and torque remain the same, but whereas the L86's "Active Fuel Management" alternates ...
The Chevrolet small-block engine is a series of gasoline -powered V8 automobile engines, produced by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block. Referred to as a "small-block" for its size relative to the physically much larger Chevrolet big-block engines, the small-block family spanned ...
The Ford Boss 302 (formally the "302 H.O.") is a high-performance "small block" 302 cu in (4.9 L) V8 engine manufactured by Ford Motor Company.The original version of this engine was used in the 1969 and 1970 Boss 302 Mustangs and Cougar Eliminators and was constructed by attaching heads designed for the planned 351 Cleveland (which debuted the following year) to a Ford small block. [1]
The 366 cu in (6.0 L) big-block V-8 gasoline engine was used in Chevrolet medium duty trucks and school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.The 366 used 4 rings on the pistons, as it was designed from the very beginning as a truck engine.
Cylinder head. In a piston engine, the cylinder head (aka " head ") sits above the cylinders, [ 1] forming the roof of the combustion chamber. In sidevalve engines the head is a simple plate of metal containing the spark plugs and possibly heat dissipation fins. In more modern overhead valve and overhead camshaft engines, the head is a more ...
The LA engine is a family of overhead-valve small-block 90° V-configured gasoline engines built by Chrysler Corporation between 1964 and 2003. A replacement of the Chrysler A engine, they were factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications. Their combustion chambers are wedge ...
These engine blocks were unchanged through the 1969 model year. The head used during this time was the so-called "rectangle port", named after its exhaust port shape. The 290 heads use smaller valves, 1.787 in (45.4 mm) intake and 1.406 in (35.7 mm) exhaust, corresponding with its small bore.
These engines were used by IHC for some heavy-duty applications until 1935, although their own large engines (525 cu in (8.6 L) FBD and 648 cu in (10.6 L) FEB) had appeared in 1932. [6] The medium-duty 1930 A-series trucks received the all-new 278.7 cu in (4.6 L) FB-3 six-cylinder engine, with overhead valves and seven main bearings.