Search results
Results From The WOW.Com Content Network
Insulation system. The electrical insulation system for wires used in generators, electric motors, transformers, and other wire-wound electrical components is divided into different classes by temperature and temperature rise. The electrical insulation system is sometimes referred to as insulation class or thermal classification.
Thermodynamic pump testing is a form of pump testing where only the temperature rise, power consumed, and differential pressure need to be measured to find the efficiency of a pump. These measurements are typically made with insertion temperature probes and pressure probes fitted to tapping points on the pump's inlet and outlet. [1]
Operating temperature. An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum ...
In a piston engine, the static compression ratio ( ) is the ratio between the volume of the cylinder and combustion chamber when the piston is at the bottom of its stroke, and the volume of the combustion chamber when the piston is at the top of its stroke. [ 9] It is therefore calculated by the formula [ 10] where. is the displacement volume.
IEC 60269 unifies the electrical characteristics of fuses that are dimensionally interchangeable with fuses built to earlier British, German, French or Italian standards. [ 2] The standard identifies application categories which classify the time-current characteristic of each type of fuse. The application category is a two-digit code.
The thermal efficiency of a heat engine is the percentage of heat energy that is transformed into work. Thermal efficiency is defined as. The efficiency of even the best heat engines is low; usually below 50% and often far below. So the energy lost to the environment by heat engines is a major waste of energy resources.
The one-hour rating is typically about 10% higher than the continuous rating and is limited by the temperature rise in the motor. As traction motors use a reduction gear setup to transfer torque from the motor armature to the driven axle, the actual load placed on the motor varies with the gear ratio.
IEC TR 60943 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals; IEC 60944 Guide for the maintenance of silicone transformer liquids; IEC 60945 Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results