Gamer.Site Web Search

Search results

  1. Results From The WOW.Com Content Network
  2. Diving regulator - Wikipedia

    en.wikipedia.org/wiki/Diving_regulator

    Diving regulator: The most familiar type is the single-hose open circuit scuba regulator, with first and second stages, low pressure inflator hose and submersible pressure gauge. Other names. Demand valve. Uses. Reduces pressurized breathing gas to ambient pressure and delivers it to the diver. Inventor.

  3. Mechanism of diving regulators - Wikipedia

    en.wikipedia.org/wiki/Mechanism_of_diving_regulators

    The valve is closed. The mechanism of diving regulators is the arrangement of components and function of gas pressure regulators used in the systems which supply breathing gases for underwater diving. Both free-flow and demand regulators use mechanical feedback of the downstream pressure to control the opening of a valve which controls gas flow ...

  4. Pilot-operated relief valve - Wikipedia

    en.wikipedia.org/wiki/Pilot-operated_relief_valve

    Pilot-operated relief valve. Cutaway view of PORV. Like other pressure relief valves (PRV), pilot-operated relief valves ( PORV) are used for emergency relief during overpressure events (e.g., a tank gets too hot and the expanding fluid increases the pressure to dangerous levels). PORV are also called pilot-operated safety valve ( POSV ), pilot ...

  5. Self-contained breathing apparatus - Wikipedia

    en.wikipedia.org/wiki/Self-contained_breathing...

    Demand: 2000 psi to the regulator from the main valve, plus a bypass valve in case of failure, with a two-stage regulator reducing pressure to 50-100 psi. Pressure-Demand: Similar to demand, but with a spring in the diaphragm, which holds the admission valve open, for continuous air flow to the facepiece.

  6. Pressure regulator - Wikipedia

    en.wikipedia.org/wiki/Pressure_regulator

    A back-pressure regulator, back-pressure valve, pressure sustaining valve or pressure sustaining regulator is a control valve that maintains the set pressure at its inlet side by opening to allow flow when the inlet pressure exceeds the set value. It differs from an over-pressure relief valve in that the over-pressure valve is only intended to ...

  7. Relief valve - Wikipedia

    en.wikipedia.org/wiki/Relief_valve

    A relief valve DN25 on cooling water pipe from heat exchanger Schematic diagram of a conventional spring-loaded pressure relief valve. A relief valve or pressure relief valve (PRV) is a type of safety valve used to control or limit the pressure in a system; excessive pressure might otherwise build up and create a process upset, instrument or equipment failure, explosion, or fire.

  8. Rotary-screw compressor - Wikipedia

    en.wikipedia.org/wiki/Rotary-screw_compressor

    Rotary-screw compressors are commonly available in the 5 through 500 HP range and can produce air flows in excess of 2500 SCFM. While the pressure produced by a single-stage screw compressor is limited to 250 PSIG, a two-stage screw compressor can deliver pressures of up to 600 PSIG.

  9. Reduced pressure zone device - Wikipedia

    en.wikipedia.org/wiki/Reduced_pressure_zone_device

    A reduced pressure zone device (RPZD, RPZ, or RPZ valve) is a type of backflow prevention device used to protect water supplies from contamination. RPZDs may also be known as reduced pressure principle (RP), reduced pressure principle backflow prevention devices, [1] [2] reduced pressure zone assemblies (RPZA), [3] or reduced pressure principle ...