Search results
Results From The WOW.Com Content Network
For premium support please call: 800-290-4726 more ways to reach us
Works with 15 mm miniatures where a 6 foot man would equal 15.24 mm 1:110: 2.771 mm Used for some model ships, aircraft and diecast cars. 1:108: 2.822 mm An historic size for ships, also used for rockets and spacecraft. 15 mm figure scale for wargaming is considered interchangeable with this scale. [9] 1:100: 3.048 mm
There were two ⌀3.2 mm negative pins spaced 9.5 mm apart and two ⌀4.0 mm positive pins spaced 14.3 mm apart. Negative and positive pins were spaced 18.1 mm apart. It was used in some early transistor radio amplifiers with a Class B output stage, allowing the loud speaker to be connected between the amplifier output and the battery center tap.
The Charrière is measured by the ''outer'' diameter, and is defined as 1 Fr = 1/3 mm, and thus 1 mm = 3 Fr; therefore the diameter of a round catheter in millimetres can be determined by dividing the French size by 3. [2] The French units roughly correspond to the outer circumference of the catheter (see table below).
You can find instant answers on our AOL Mail help page. Should you need additional assistance we have experts available around the clock at 800-730-2563.
In the normal series, the long edge is the length of the short edge plus 2 inches (10 in or less) or 3 inches (11 in and above). The alternative Super series, denoted SnR, nR Plus or nR+, has an aspect ratio of 3∶2 (or as close as possible) and thus provides a better fit for standard 135 film (35 mm) at sizes of 8 inches or above. 5R is twice ...
Reels of up to 7 inches (18 cm) in diameter, most commonly with plastic flanges but metal was also used, which fit over a splined 1 ⁄ 4 in (6.4 mm) shaft. These reels dominated domestic applications. The most common sizes were seven, five and three inches (17.8, 12.7 and 7.6 cm) in diameter. In each case the shaft or hub had three splines.
Display size. On 2D displays, such as computer monitors and TVs, the display size or viewable image size ( VIS) is the physical size of the area where pictures and videos are displayed. The size of a screen is usually described by the length of its diagonal, which is the distance between opposite corners, usually in inches.