Search results
Results From The WOW.Com Content Network
Computer cooling. A finned air cooled heatsink with fan clipped onto a CPU, with a smaller passive heatsink without fan in the background. A 3-fan heatsink mounted on a video card to maximize cooling efficiency of the GPU and surrounding components. Commodore 128DCR computer's switch-mode power supply, with a user-installed 60 mm cooling fan.
Heated water in the suit forms an active insulation barrier to heat loss, but the temperature must be regulated within fairly close limits. If the temperature falls below about 32 °C, hypothermia can result, and temperatures above 45 °C can cause burn injury to the diver.
The tested SWH system had about 20% of the impact of an electrical water heater and half that of a gas water heater. [ 50 ] Analysing their lower impact retrofit freeze-tolerant solar water heating system, Allen et al. (qv) reported a production CO 2 impact of 337 kg, which is around half the environmental impact reported in the Ardente et al ...
Thermoelectric cooling. Thermoelectric cooling uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending ...
The flash point is a descriptive characteristic that is used to distinguish between flammable fuels, such as petrol (also known as gasoline ), and combustible fuels, such as diesel . It is also used to characterize the fire hazards of fuels. Fuels which have a flash point less than 37.8 °C (100.0 °F) are called flammable, whereas fuels having ...
Thermally processed material is usually totally amorphous, [7] and as a result is highly transparent to visible light, with better light transmission than many kinds of glass. Polycarbonate has a glass transition temperature of about 147 °C (297 °F), [ 8 ] so it softens gradually above this point and flows above about 155 °C (311 °F). [ 9 ]
It is not affected by pipe diameter, room operative temperature, supply water temperature, and water flow regime. By using response time, radiant systems can be classified into fast response (τ95< 10 min, like RCP), medium response (1 h<τ95<9 h, like Type A, B, D, G) and slow response (9 h< τ95<19 h, like Type E and Type F). [ 34 ]
Color temperature is a parameter describing the color of a visible light source by comparing it to the color of light emitted by an idealized opaque, non-reflective body. The temperature of the ideal emitter that matches the color most closely is defined as the color temperature of the original visible light source.