Search results
Results From The WOW.Com Content Network
The engine performance deteriorates with use as parts wear, meaning the engine has to use more fuel to get the required thrust. A new engine starts with a reserve of performance which is gradually eroded. The reserve is known as its temperature margin and is seen by a pilot as the EGT margin. For a new CFM International CFM56-3 the margin is 53 ...
The 2016 Chevrolet Malibu Hybrid car features an Exhaust gas Heat Recovery (EGHR) system to accelerate coolant heat up time. This gives faster heat up of the engine coolant which in turn heats up the engine faster. Less fuel is used giving reduced emissions. This will also quicken cabin heating warm up for passenger comfort and window defrosting.
In electrical and safety engineering, hazardous locations (HazLoc, pronounced haz·lōk) are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to ...
Engine knocking. In spark-ignition internal combustion engines, knocking (also knock, detonation, spark knock, pinging or pinking) occurs when combustion of some of the air/fuel mixture in the cylinder does not result from propagation of the flame front ignited by the spark plug, but when one or more pockets of air/fuel mixture explode outside ...
EGR valve the top of box on top of the inlet manifold of a Saab H engine in a 1987 Saab 90. In internal combustion engines, exhaust gas recirculation ( EGR) is a nitrogen oxide ( NO x) emissions reduction technique used in petrol/gasoline, diesel engines and some hydrogen engines. [ 1] EGR works by recirculating a portion of an engine's exhaust ...
v. t. e. An automotive thermoelectric generator (ATEG) is a device that converts some of the waste heat of an internal combustion engine (IC) into electricity using the Seebeck Effect. A typical ATEG consists of four main elements: A hot-side heat exchanger, a cold-side heat exchanger, thermoelectric materials, and a compression assembly system.
The term recuperator refers as well to liquid-liquid counterflow heat exchangers used for heat recovery in the chemical and refinery industries and in closed processes such as ammonia-water or LiBr-water absorption refrigeration cycle. Recuperators are often used in association with the burner portion of a heat engine, to increase the overall ...
Cogeneration or combined heat and power ( CHP) is the use of a heat engine [ 1] or power station to generate electricity and useful heat at the same time. Cogeneration is a more efficient use of fuel or heat, because otherwise- wasted heat from electricity generation is put to some productive use. Combined heat and power (CHP) plants recover ...