Search results
Results From The WOW.Com Content Network
Retrieved 4 April 2018. 1.2.3.3 Definition of Room Temperature: According to the United States Pharmacopeia National Forumlary [ sic] (USP-NF), the definition of room temperature is between 15 and 30 °C in the United States. However, in the EU, the room temperature is defined as being 15 to 25 °C, while in Japan, it is defined being 1 to 30 °C.
The USP Controlled Room Temperature is a series of United States Pharmacopeia guidelines for the storage of pharmaceuticals; [1] the relevant omnibus standard is USP 797. [2] [3] Although 100% compliance remains challenging for any given facility, [4] the larger protocol may be regarded as constituting a form of clean room [5] which is included in a suite of best practices.
The heat index ( HI) is an index that combines air temperature and relative humidity, in shaded areas, to posit a human-perceived equivalent temperature, as how hot it would feel if the humidity were some other value in the shade. For example, when the temperature is 32 °C (90 °F) with 70% relative humidity, the heat index is 41 °C (106 °F ...
Externally, the upper limit of the human body’s thermoneutral zone—the ambient temperature range in which the body can effectively maintain its temperature and equilibrium—likely falls ...
An operating temperature is the allowable temperature range of the local ambient environment at which an electrical or mechanical device operates. The device will operate effectively within a specified temperature range which varies based on the device function and application context, and ranges from the minimum operating temperature to the maximum operating temperature (or peak operating ...
The recommended level of indoor humidity is in the range of 30–60% in air conditioned buildings, [34] [35] but new standards such as the adaptive model allow lower and higher humidity, depending on the other factors involved in thermal comfort. Recently, the effects of low relative humidity and high air velocity were tested on humans after ...
Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 10 5 Pa (100 kPa, 1 bar ). NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [ 3] This standard is also called normal temperature and pressure (abbreviated as NTP ).
Differential scanning calorimetry ( DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. [ 1] Both the sample and reference are maintained at nearly the same temperature throughout the experiment.