Search results
Results From The WOW.Com Content Network
Radiator (engine cooling) Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plants or any similar use of such an engine. Internal combustion engines are often cooled by circulating a liquid called engine ...
Internal combustion engine cooling. Internal combustion engine cooling uses either air or liquid to remove the waste heat from an internal combustion engine. For small or special purpose engines, cooling using air from the atmosphere makes for a lightweight and relatively simple system. Watercraft can use water directly from the surrounding ...
PID code (e.g.: 05 = Engine coolant temperature) value of the specified parameter, byte 0 value, byte 1 (optional) value, byte 2 (optional) value, byte 3 (optional) not used (may be 00h or 55h) Vehicle specific 7E8h, or 8h + physical ID of module. Number of additional data bytes: 4to 7
Antifreeze. An antifreeze is an additive which lowers the freezing point of a water-based liquid. An antifreeze mixture is used to achieve freezing-point depression for cold environments. Common antifreezes also increase the boiling point of the liquid, allowing higher coolant temperature. [ 1] However, all common antifreeze additives also have ...
A coolant is a substance, typically liquid, that is used to reduce or regulate the temperature of a system. An ideal coolant has high thermal capacity, low viscosity, is low-cost, non-toxic, chemically inert and neither causes nor promotes corrosion of the cooling system. Some applications also require the coolant to be an electrical insulator .
For premium support please call: 800-290-4726 more ways to reach us
It is the primary airport serving the Inland Northwest, which consists of 30 counties and includes areas such as Spokane, the Tri-Cities, both in Eastern Washington, and Coeur d'Alene in North Idaho. The airport's code, GEG, is derived from its former name, Geiger Field, which honored Major Harold Geiger (1884–1927).
It was found that coolant temperature increased by almost 20 °C (36 °F) during the first four hours, regardless of the initial temperature. Four tests were run at ambient temperatures ranging from −29 to −11 °C (−20 to 12 °F); continued use of the heater for up to two hours more only further increased the temperature by up to 3 °C (5 ...