Search results
Results From The WOW.Com Content Network
The third and fourth bytes are to be interpreted differently depending upon whether the engine is spark ignition (e.g. Otto or Wankel engines) or compression ignition (e.g. Diesel engines). In the second byte (B), bit 3 indicates the engine type and thus how to interpret bytes C and D, with 0 being spark (Otto or Wankel) and 1 (set) being ...
Basic principles. Most internal combustion engines are fluid cooled using either air (a gaseous fluid) or a liquid coolant run through a heat exchanger ( radiator) cooled by air. Marine engines and some stationary engines have ready access to a large volume of water at a suitable temperature. The water may be used directly to cool the engine ...
An air-cooled engine requires a steady flow of air for cooling. Most air-cooled engines have thermostats controlling air doors or flaps to help the engine reach operating temperature as quickly as possible. Any failure of the cooling system will cause engine failure via scuffed piston skirts. Air-cooled engines are used in aircraft engine ...
The Cummins M-series engine is a straight-six diesel engine designed and produced by Cummins.It displaces 10.8 litres (659.1 cu in).Introduced as the M11 in 1994, it was built on the previous L10 engine (same 4.921 inches (125.0 mm) cylinder bore, but a longer 5.787 inches (147.0 mm) piston stroke compared to the L10's 5.354 inches (136.0 mm) stroke).
The engine temperature on modern cars is primarily controlled by a wax-pellet type of thermostat, a valve that opens once the engine has reached its optimum operating temperature. When the engine is cold, the thermostat is closed except for a small bypass flow so that the thermostat experiences changes to the coolant temperature as the engine ...
DOHC 4 valves x cyl. The M176/M177/M178 is a petrol V8 engine range designed by Mercedes-AMG, replacing the M278 and M157 engines, and is based on the M133 engine. [1] The engine has two BorgWarner turbochargers positioned between the two cylinder heads in a "hot-V" configuration. The fuel injection system uses Bosch's new piezo-electric direct ...
The 4HF1-CNG is a CNG engine of 4.334 L capacity (as based on direct injection diesel engine) with non-contact ignition system. Peak torque is 323 Nm, peak power is 120 PS (88 kW) at 1,500 rpm. Bore is 115 mm, stroke is 108 mm. The 4HV1 is a CNG engine of 4.570 L capacity with non-contact ignition system.
Diesel engines. Some small diesel engines, e.g. those made by Deutz AG and Lister Petter are air-cooled. Probably the only big Euro 5 truck air-cooled engine (V8 320 kW power 2100 N·m torque one) is being produced by Tatra. BOMAG part of the FAYAT group also utilizes an air cooled inline 6 cylinder motor, in many of their construction vehicles.