Search results
Results From The WOW.Com Content Network
Combustibility and flammability. A combustible material is a material that can burn (i.e., sustain a flame) in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.
HAZMAT Class 3 Flammable liquids. A flammable liquid is a liquid with flash point of not more than 60.5 °C (141 °F), or any material in a liquid phase with a flash point at or above 37.8 °C (100 °F) that is intentionally heated and offered for transportation or transported at or above its flash point in a bulk packaging.
A flammable liquid is a liquid which can be easily ignited in air at ambient temperatures, i.e. it has a flash point at or below nominal threshold temperatures defined by a number of national and international standards organisations. The Occupational Safety and Health Administration (OSHA) of the United States Department of Labor defines a ...
Division 2.3: Toxic Gas Gas poisonous by inhalation means a material which is a gas at 20 °C or less and a pressure of 101.3 kPa (a material which has a boiling point of 20 °C or less at 101.3kPa (14.7 psi)) and which: Is known to be so toxic to humans as to pose a hazard to health during transportation, or
Near misses. This list includes substances that boil just above standard condition temperatures. Numbers are boiling temperatures in °C. 1,1,2,2,3-Pentafluoropropane 25–26 °C [151][3] Dimethoxyborane 25.9 °C. 1,4-Pentadiene 25.9 °C. 2-Bromo-1,1,1-trifluoroethane 26 °C. 1,2-Difluoroethane 26 °C. Hydrogen cyanide 26 °C.
Fire. A burning candle. Fire is the rapid oxidation of a material (the fuel) in the exothermic chemical process of combustion, releasing heat, light, and various reaction products. [1][a] At a certain point in the combustion reaction, called the ignition point, flames are produced. The flame is the visible portion of the fire.
Division 4.1: Flammable Solid . Flammable solids are any of the following four types of materials: Desensitized Explosives: explosives that, when dry, are Explosives of Class 1 other than those of compatibility group A, which are wetted with sufficient water, alcohol, or plasticizer to suppress explosive properties; and are specifically authorized by name either in the 49CFR 172.101 Table or ...
Normal boiling points for pure substances, bubble and dew points for zeotropic blends, or normal boiling point and azeotropic temperature for the azeotropic blends, at 101,325 Pa (1 atmosphere) and in degrees Celsius; Critical temperature in degrees Celsius; Absolute critical pressure in kilopascals