Search results
Results From The WOW.Com Content Network
An air-cooled engine uses all of this difference. In contrast, a liquid-cooled engine might dump heat from the engine to a liquid, heating the liquid to 135 °C (water's standard boiling point of 100 °C can be exceeded as the cooling system is both pressurised, and uses a mixture with antifreeze) which is then cooled with 20 °C air.
Oxygen sensor. An oxygen sensor (or lambda sensor, where lambda refers to air–fuel equivalence ratio, usually denoted by λ) or probe or sond, is an electronic device that measures the proportion of oxygen (O 2) in the gas or liquid being analyzed. It was developed by Robert Bosch GmbH during the late 1960s under the supervision of Günter ...
The engine temperature on modern cars is primarily controlled by a wax-pellet type of thermostat, a valve that opens once the engine has reached its optimum operating temperature. When the engine is cold, the thermostat is closed except for a small bypass flow so that the thermostat experiences changes to the coolant temperature as the engine ...
A heater core is a radiator -like device used in heating the cabin of a vehicle. Hot coolant from the vehicle's engine is passed through a winding tube of the core, a heat exchanger between coolant and cabin air. Fins attached to the core tubes serve to increase surface area for heat transfer to air that is forced past them by a fan, thereby ...
Exhaust Gas Temperature Sensor 99: 153: 9 Exhaust Gas Temperature Sensor 9A: 154: 6 Hybrid/EV Vehicle System Data, Battery, Voltage 9B: 155: 4 Diesel Exhaust Fluid Sensor Data % 9C: 156: 17 O2 Sensor Data 9D: 157: 4 Engine Fuel Rate g/s 9E: 158: 2 Engine Exhaust Flow Rate kg/h 9F: 159: 9 Fuel System Percentage Use A0: 160: 4
MAP sensor. The manifold absolute pressure sensor ( MAP sensor) is one of the sensors used in an internal combustion engine 's electronic control system. Engines that use a MAP sensor are typically fuel injected. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU).
Mass flow sensor. A mass (air) flow sensor ( MAF) is a sensor used to determine the mass flow rate of air entering a fuel-injected internal combustion engine . The air mass information is necessary for the engine control unit (ECU) to balance and deliver the correct fuel mass to the engine. Air changes its density with temperature and pressure.
Car engine thermostat. Perhaps the most common example of purely mechanical thermostat technology in use today is the internal combustion engine cooling system thermostat, used to maintain the engine near its optimum operating temperature by regulating the flow of coolant to an air-cooled radiator. This type of thermostat operates using a ...